Product Details
Damping reactor
The damping reactor is connected in series with one or more capacitor banks. Its purpose is to limit the switching surge current of the capacitors, while also being able to withstand the
Key words:
Damping reactor
Category:

E-mail:
Details
Damping Reactor
Up to 1100 kV
The damping reactor is connected in series with one or more capacitor banks. Its purpose is to limit the switching surge current of the capacitor, while also being able to withstand the rated current and fault current during a short circuit.
Operating Conditions
Location: Indoor or Outdoor
Ambient Temperature: -40℃~+50℃ (as per customer requirements)
Altitude: ≤3000 meters (as per customer requirements)
Maximum Wind Speed: 45 meters/second (as per customer requirements)
Relative Humidity: ≤90%
Seismic Resistance: Horizontal 0.30g (as per customer requirements)
Vertical 0.15g (as per customer requirements)
Ventilation should be considered when used indoors.
The installation location must be clean and free of harmful gases, vapors, conductive materials, and explosive dust.
Send Inquiry
We will contact you within one working day. Please pay attention to your email.
Related Solutions
A novel parallel reactor is connected to the power system in a parallel configuration to compensate for capacitive reactive power in the transmission and distribution system.
Intelligent Transformer Breather( ITB)
An IoT-enabled transformer accessory dedicated to digitalized monitoring of respiration metrics (flow rate, temperature, humidity) for large power transformers. It eliminates manual maintenance through active silica gel regeneration and delivers real-time insulation condition analytics.
Our wave trap surgically remove specific interference frequencies (e.g., 50/60Hz hum, RF noise). Featuring high Q factor and steep attenuation, they eliminate unwanted signals while protecting adjacent frequencies—boosting SNR, dynamic range, and system reliability in audio processing, RF design, and test & measurement applications.