Product Details
Line traps
The line traps are connected in series with the high-voltage and ultra-high-voltage AC power lines. Its design purpose is to introduce high impedance in the carrier frequency range
Key words:
Line traps
Category:
E-mail:
Details
Line traps
Up to 750 kV
Line traps are connected in series with high-voltage and ultra-high-voltage AC power lines. Their design purpose is to introduce high impedance in the carrier frequency range of 40 kHz to 500 kHz, while the impedance is negligible at power frequency. The high impedance ensures that the carrier signal is not lost or attenuated when entering the substation.
Operating Conditions
Location: Indoor or outdoor
Ambient temperature: -40℃~+50℃ (as per customer requirements)
Altitude: ≤3000 meters (as per customer requirements)
Maximum wind speed: 45 meters/second (as per customer requirements)
Relative humidity: ≤90%
Seismic resistance: Horizontal 0.30g (as per customer requirements)
Vertical 0.15g (as per customer requirements)
Ventilation should be considered when used indoors.
The installation location must be clean and free of harmful gases, vapors, conductive bodies, and explosive dust.
Send Inquiry
We will contact you within one working day. Please pay attention to your email.
Related Solutions
A novel parallel reactor is connected to the power system in a parallel configuration to compensate for capacitive reactive power in the transmission and distribution system.
Intelligent Transformer Breather( ITB)
An IoT-enabled transformer accessory dedicated to digitalized monitoring of respiration metrics (flow rate, temperature, humidity) for large power transformers. It eliminates manual maintenance through active silica gel regeneration and delivers real-time insulation condition analytics.
Our wave trap surgically remove specific interference frequencies (e.g., 50/60Hz hum, RF noise). Featuring high Q factor and steep attenuation, they eliminate unwanted signals while protecting adjacent frequencies—boosting SNR, dynamic range, and system reliability in audio processing, RF design, and test & measurement applications.
Address: 902-903, Building 1, Yard 15, Xinya Street, Daxing District, Beijing, China
135-8888-9999
Feedback
Please fill out this form and we will contact you on the next business day.